Online Help
- Plus Specific Configuration:
- Using Mediatracker's
Hotspot Billing:
For proper crediting and custom login page using Mediatracker's
Hotspot billing system you must obtain a hotspot id from mediatracker
support. This id is entered in the Hotspot ID filed in the ControlAP Administration Advanced
Properties page. You can additionally submit a cusotm logo,
specifiy a color and additional text.
- Using your own backend billing system with ControlAP:
For more information contact support. You must
redirect the login URLs to your external server
- see below.
- How to revert to ControlAP Standard:
From
ControlAP
Administrator Advanced Properties (https://localhost:8090/admin)
edit the Web Authentication Server and Web Authentication Server Login
check fields and set them to be blank.
- Using ControlAP Plus to authenticate with Radius Servers:
In the ControlAP Admin Advanced Page, fill in the Radius
authentication and accounting servers and shared secrets for both the
primary and secondary (failover) servers. For Type, the options are
currently pap and chap. Additional types may be supported in future
updates.
- Setting up a custom SSL certificate
with
ControlAP for the Web Administrator
- NOTE for AP (Embedded) edition of ControlAP Plus (e.g. Linksys WRT54G)
<>
Assuming 12.34.56.78 is ControlAP Pro public IP address (or use your domain name):
web auth URL: https://12.34.56.78/hotspot/login
If you are not running a hotspot at ControlAP Pro
login check URL: http://12.34.56.78/hotspot/check
If you are running a local hotspot at ControlAP Pro use a different port:
login check URL: http://12.34.56.78:81/hotspot/check
In either case you have to additionally edit the following file at ControlAP Pro:
mediatracker/conf/server.xml:
uncomment from:
<!--
<Connector port="80" maxThreads="150"
minSpareThreads="25" maxSpareThreads="75" enableLookups="false"
redirectPort="443" acceptCount="100" debug="0"
connectionTimeout="20000" disableUploadTimeout="true"/>
-->
to:
<Connector port="80" maxThreads="150"
minSpareThreads="25" maxSpareThreads="75" enableLookups="false"
redirectPort="443" acceptCount="100" debug="0"
connectionTimeout="20000" disableUploadTimeout="true"/>
and change port 80 to 81 if you are also running a hotspot at Pro location. If not, do not "Start" the local hotspot.
For above change to take affect, you have to exit and run ControlAP Pro again.
>
- Standard Hardware and Software Installation:
- Standard ControlAP Configuration:
- Frequently Asked Questions:
- Latest Readme file:
copyright © 2002-2004
mediatracker.com software.